How to Install the Pump on the Well
If you want your pump smoothly and a long
work, you must correctly install it on wells from. Otherwise, the pump can turn
into a useless pile of iron, suitable only for scrappage. You will need PVC
hose, nylon cord, the crossbar, medical tourniquet, and a rubber ring.
Set the pump in the well is usually not a
big deal. However, there are minor tweaks that should be considered before the
installation of the pump as well. By doing this you will save yourself from
wasting resources and their time. The diameter of the hose should be
approximately 20 mm. To calculate the required length of the hose beforehand
find out how deep the water rises and falls. This will help you choose the
correct hose length. Such attachment may not be correct, furthermore, it can be
dangerous. The case of domestic pump often is made of aluminum. And while
working pump and formed quite a strong vibration. Metal suspension is fully
capable to deform the body at the point of connection to the wire or cable.
This leads to damage to the pump as well, and it is impossible to raise it from
the hole.
Competent solution will use the cord of
nylon. He is not subject to the ravages of water and durable. 5 For greater
fidelity should be equipped with a pump of special springy suspension. Such a
suspension can pay off the vibration. It is particularly important use of the
suspension in the shallow water. Produce a spring suspension can be in the home
of a medical wire or a rubber band. BTW, you can select the solar
circulation pump at Banggood. Besides, you can easily get other electrical
accessories (e.g. CS918
Android) there with high quality and reasonable prices.