How to Connect the Switches with Illumination
In some models of switches provides neon
lights from the manufacturer. These switches are connected
according to a certain pattern, where it glows when the off position, that is,
when the contacts break. Its use makes it possible not to seek the switch
in a dark room to the touch, and immediately see its location. Additionally,
burning lights also indicates that the ambient light is off, which is very
convenient, for example, if you want to go down to the basement.
Performing any work with electricity, it is
necessary to observe safety precautions and follow the exact wiring diagram. If
this is not done, then the electrical work can harm your life or health. It
is better if all kinds of connections and connections will produce a
professional electrician. Connect the switch with backlight can be
directly from the switchboard or from any nearest junction box. Turn off the
power to the panel. Make sure that it really is not. Check it needed
touching each wire indicator device or a screwdriver (preferably with a rubber
handle).
Connect one of wires backlight switch to
the common terminal and the other - to the remainder of the terminal. The
backlight will switch off at work. Himself switch, connect the power supply in
accordance with standard wiring diagram, i.e. hooking phase wires to the
terminals of the switch. BTW, you can select the time
relay switch at Banggood. Besides, you can easily get other electrical
accessories (e.g. TV
remote holder organizer) there with high quality and reasonable prices.
If you put energy-saving lamps, then when
you turn lights will blink, as it is designed only for use with incandescent
lamps. Qualified electrician to verify connectivity and compliance with all
standards and requirements of the work performed.