How to Connect the Motion Sensor Lighting
Each person more than once noticed motion
sensors, which include light. Such an arrangement can be called great, it is
suitable for installation: at the entrance, on the street, near a private
house, on the fence, etc. In this article we will answer the burning question,
how to connect solar
powered motion lights to illuminate on our own hands, just want to
point out the complex in such a setting there is nothing one can do it.
Any motion sensor for switching of lighting
has a fairly simple principle of work. There are three species that respond to
a particular signal.
- Responsive to sound.
- Vibrational. In this case, it closes the
circuit when they see near objects.
- Infrared responsive to heat.
We now consider the more important
question, and figure out how to connect the motion detector. Now there are
several combinations, each of them has its own characteristics.
The first circuit connecting the motion
sensor is the simplest, but at the same time it cannot be considered optimal
for installation in home or apartment. The light will turn on only when the
sensor detects motion. The second scheme is considered to be optimal. It is
possible to switch the circuit breaker to normal. Everything can be turned on
or off manually if desired. The third circuit is necessary in the case where
the nominal transmitter power ranges from 500 to 1000 watts. According to this
scheme are connected solar powered motion lights, it is desirable to add to the
circuit magnetic contactor. Last connection diagram of the motion sensor is
used when you need to install it in large rooms or at their summer cottage. It
can also be applied to the winding corridor, the scheme is considered quite
complicated. It is usually used only by professionals. BTW, you can select the solar-powered
motion sensor security light at Banggood. Besides, you can easily get
other lighting and lighting accessories (e.g. warm white LED flood light) there
with high quality and reasonable prices.