Connecting 12V and 220V LED Tape
LED Strip is a narrow strip, on which the small
bulbs are placed. Today, this type of lighting is used to create decorations.
Cassettes with flexible tapes are available in up to five meters. Pruning LED
is only allowed in specially designated areas. This type of lighting elements
mostly used in design projects. For information on how to carry out the
installation and connection of LED strip can be found in this article.
LED lights can consume electricity 12V or
24V and operate from 220V. Power supply for such devices is designed on the
principle of pulse transformation and designed for power from 30 to 400W. The
most common is the LED Light Strip 12V DC
adapter plug which does not require special skills and knowledge.
To power the device, you must attach the
appropriate contacts with the correct polarity. Connecting the LED strip 220
different colors can be achieved by a special controller that connects to the
negative power supply and the corresponding contacts of each tape. To fix the
diodes in the right place, even the most ordinary double-sided tape can be
used.
The tape is most often available in a
five-meter coil with a multiplicity of cutting width of three diodes. This rate
may vary depending on the density and placement of light bulbs which way
planned connection LED strip. 15 m - is the maximum allowable length of the
section with a serial connection. To illuminate the ceiling in an ordinary
residential area quite enough three coils. BTW, you can select the 240V
adapter plug at Banggood for high quality and reasonable prices.