Dimmable Edison Bulbs
Edison lamps are the imitation of old
incandescent bulbs invented by Thomas Edison. They are used to create a
warm and cozy atmosphere in the rooms, and are used as outdoor lighting. They
are used both with and without shades, and figured located tungsten filament
only gives them additional charm.
The light source is in the white
Edison bulb, which is in the form of various shapes. By default, this
type of instrument is available with a standard size cap E27, in some
cases, the manufacturer makes their socket B22 or B14. Below are the main
specifications:
- for a nominal capacity of the network is
220 volts;
- life is from 2500 to 3000 hours;
- It measures the color temperature of 2700K,
which corresponds, warm white or yellow luminescence spectrum;
They are produced with different power
consumption of electricity from 25 to 100 watts. In addition to being retro
lamp caps are manufactured with different sizes: E27, B22 or E14 ,
they still can be of various shapes: a tube length of 28 cm diameter round
flask to 25 cm and a classical pyriform.
The shape of the tungsten filament
following types:
- sheet-like;
- a stud;
- spiral;
- in the form of Christmas trees;
- in the form of the cage;
- looping.
Part retro lamps manufactured with glass
pleasant amber color, but there are options with splashes of silver or gold
color. As mentioned above, these devices are made with different types of caps. Distributed
version with E27 standard size, but sales there are other kinds. Edison lamps -
these are the same incandescent lamp stylized antique. Consequently, they
also have the same structure. The body of this device is a sealed glass bulb in
which the "body glow" - spiral, made of a refractory material
(tungsten). When current flows through the heating coil it occurs. To
extend the life of the body filament glass bulb filled with an inert gas
service, in most cases argon is used. BTW, you can select the Dimmable Edison Bulbs
at Banggood. Besides, you can easily get other lights (e.g. 12W
LED bulb) there with high quality and reasonable prices.
Connecting 12V and 220V LED Tape
LED Strip is a narrow strip, on which the small
bulbs are placed. Today, this type of lighting is used to create decorations.
Cassettes with flexible tapes are available in up to five meters. Pruning LED
is only allowed in specially designated areas. This type of lighting elements
mostly used in design projects. For information on how to carry out the
installation and connection of LED strip can be found in this article.
LED lights can consume electricity 12V or
24V and operate from 220V. Power supply for such devices is designed on the
principle of pulse transformation and designed for power from 30 to 400W. The
most common is the LED Light Strip 12V DC
adapter plug which does not require special skills and knowledge.
To power the device, you must attach the
appropriate contacts with the correct polarity. Connecting the LED strip 220
different colors can be achieved by a special controller that connects to the
negative power supply and the corresponding contacts of each tape. To fix the
diodes in the right place, even the most ordinary double-sided tape can be
used.
The tape is most often available in a
five-meter coil with a multiplicity of cutting width of three diodes. This rate
may vary depending on the density and placement of light bulbs which way
planned connection LED strip. 15 m - is the maximum allowable length of the
section with a serial connection. To illuminate the ceiling in an ordinary
residential area quite enough three coils. BTW, you can select the 240V
adapter plug at Banggood for high quality and reasonable prices.
LED Strip Light 5050
Earlier, people got along fine without
light, all of them perfectly suited, but now society cannot do without
lighting. The further process, the greater the demands put forward by buyers.
For example, simple installation, a bright light, quite a lot of work time
without problems, safety, and cost savings.
LED strip 5050 LED, if not strange, is
ideal for all of these parameters. It is quite safe, and it does not do any
threat to the human body. And most importantly - it works more than 50000
hours, which is quite a big advantage. In addition, this type of LED strip is a
flexible board, on one side of which are arranged the LEDs, which emit light.
And the ease of installation and lack of extreme heat during operation - it's
just something different and quite interesting for people.
The tracks, which are conductive, are the
foundation. It is known to many people, has only two colors - white or brown.
It should also be carefully noted that the three LEDs connected in series and
modules consisting of three of these diodes are connected in parallel. All this
is contained in a single tape, which is attached to any surface through an
adhesive strip located on the other side of the LEDs. Therefore, these tapes -
is the ideal solution for modern humanity. After all, not such a long tape is
required for normal lighting normal room.
At this time, popular LED strip, 5050 RGB LED
Strips, unfortunately, does not protect against moisture, so you should use
airtight protection for use outdoors or in rooms with excessive humidity. But
most people find it a place in the car or in small spaces, decorating and
complementing the interior. It works with a voltage of 12 volts and 72 watts of
power. BTW, you can select the 5050 RGB 12V
LED strip light at Banggood. Besides, you can easily get other lights (e.g.
Nitecore
P30) there with high quality and reasonable prices.
Outdoor Pendant Lights in the Garden
Outdoor pendant lights are good because
they can be hung on a ceiling or on a tree branch. This makes it possible to
show imagination and create a unique design of your garden plot, only need a
little dream.
How best to hang lights?
First, decide what you want to achieve by
lighting? Do you hang it for its beauty or for work? If you just go to decorate
a garden and secure a pleasant evening walks, the place lights in the flower
beds and a pond or pool, if any. Reflection of light in the water always looks
charmingly. If you have some special garden plot, then select it with the
world. From a practical point of view, the need to cover the paths and
entrances to the house, a toilet, a bath, a wood shed and other buildings where
you anything you may need in the dark.
If you are a big fan of digging in the
ground, then hang himself lighting the garden or the garden. There is one
trick, to which you can resort to save on lighting fixtures. Buy a cute pendant
light, but do not attach it to the ceiling with nails, and on the hook, plug it
into the extension cord on the reel and move through the garden, outweighing
from branch to branch, or other support where you need to work on. With the
help of a pair of three such devices, you can change the mood of the garden
lighting, without spending extra money.
LED Garlands to Decorate Houses and Streets
On the eve of the winter holidays, when it gets dark early, the streets appear beautiful decorations - trees and roof slope, over the entrances to the building and the doors and windows. LED garlands of all kinds and colors make the evening the bright and the mood becomes a little magic. Because of the small light bulbs darkness thickens and becomes more velvety, almost tangible.
We seem to find ourselves in a fairy-tale world filled with magical flickering light. These days begin long before the New Year, and thanks to the fact that the LED string, which is nice fringe hanging from the wires of the central streets, shining softly in the evening darkness, our sense of solemnity future events fill the heart. And we, as children, believe in miracles, in fact, that very soon will come true fondest wish.
In the city the number of garlands that adorn the windows and wires, trees and windows, increasing for the New Year. An introduction to the celebration cannot remain incomprehensible even for foreign visitors - wordlessly and bright LED garlands are involved in creating a festive background. Multi-colored lights through the misted windows Transport and apartments blooming marvelous flowers and garlands properties smooth braid wires and tree branches create a whole world, now the space game of shadows and light.
New Year is definitely a family holiday, and decorated with garlands, ever becomes relevant in these days. But traditional corporate celebration on the eve of New Year holidays also applies to labor groups. Events that are held in honor of the New Year often go directly to the workplace, and if not symbolic spruce or pine, dressed balls, bows, stars, or icicles on the top, or at least a branch green beauty lavishly decorated with LEDs. BTW, you can select the lamp decoration at Banggood. Besides, you can easily get other electrical accessories (e.g. big keychain, laser pointer pattern heads) here with high quality and reasonable prices.
How to Connect the Motion Sensor Night Lighting
Each person more than once noticed motion
sensors, which include light. Such an arrangement can be called great, it is
suitable for installation: at the entrance, on the street, near a private
house, on the fence, etc. In this article we will answer the burning question,
how to connect a motion sensor to illuminate by our own hands, just want to
point out the complex in such a setting there is nothing one can do it.
Any motion sensor for switching of lighting
has a fairly simple principle of work. There are three species that respond to
a particular signal.
- Responsive to sound. If the sensor notices
the noise in the area of their work.
- Vibrational. In this case, it closes the
circuit when they see near objects.
- Infrared responsive to heat.
We now consider the more important
question, and figure out how to connect the motion detector. Now there are
several combinations, each of them has its own characteristics.
The first circuit connecting the motion
sensor is the simplest, but at the same time it cannot be considered optimal
for installation in home or apartment. The hallway
night light will turn on only when the sensor detects motion. BTW, you
can select the battery
sensor light at Banggood. Besides, you can easily get other lighting accessories
(e.g. scope flashlight mount) there with high quality and reasonable prices.
Wireless Ceiling Lights with Remote Control
Chandeliers, equipped with remote control
(RC) - is an easy-to-use and economical lighting fixture. Ceiling lamp with
remote control installed in the large-sized modern apartments, private homes,
offices, shops. Popularity of lighting with remote control is due to their
functionality and resistance to frequent switching and durability.
Lamps with remote control do not differ in
appearance from conventional ceiling chandeliers. A feature of the device is a
remote control, battery-operated, and allows you to control the lights in the
distance. With it you can easily turn on or off the chandelier, adjust the
brightness of the light in the room, while staying in another room. The range
of signal may vary in different devices from 30 to 100 meters. Wireless
ceiling lights with remote control usually have metal base and glass,
acrylic or crystal ceiling. The market offers a wide range of lighting products
with remote control of different shape, size and destination. There are
fixtures for the kitchen, bedroom, nursery, living room and other rooms. You
can buy a round, oval, square, triangular chandelier with a lot of decorative
elements or with their complete absence.
Chandeliers with remote control - are
devices that have multiple modes of operation, and equipped with both halogen
and LED lamps. There are several switching combinations:
• halogen lamps;
• LED lamp;
• Combined switch.
This functionality can be accessed only by
the presence of a remote control, as wall switches are not suitable for
switching between modes 4-5 luminaire. The sensors are arranged inside the
reception signal so that it is impossible to see them. BTW, you can select the Ceiling
Lights with Remote Control at Banggood. Besides, you can easily get other lighting
accessories (e.g. light
socket adaptor) there with high quality and reasonable prices.
How to Make a Backlight for a Crane
As in the night, not including indoor
light, open the tap with cold water? You can try to find it at random. Or you
can include memory. And you can consider this situation in advance and make the
backlight for the crane.
You will need
- Plastic clutch;
- Plastic caps;
- A small nipple;
- 20-cc syringe;
- 5 cc syringe;
- The wire;
- Batteries in the form of a tablet;
- Toggle switch;
- Impeller with a nozzle;
- Soldering iron;
- Drill with a drill;
- Knife.
BTW, you can select the LED
tap lights and the tools mentioned above at Banggood for high quality
and reasonable prices.
Cut by a turbine in the middle of the
plastic cap (on the outside of his hand) hole using a special circular nozzle. Drill
the side of the plastic sleeve hole is designed to be installed in his switch. Cut
the tip of the knife 20, a bottom of the syringe. Place a bottom housing 20 in
a plastic syringe cap. The one end of the syringe, which protrudes from under
the hood, and connect the nipple (Shove thin section of the pin in the
syringe).
From 5-bottoms make the syringe container
for batteries. Solder to the design of the container with battery. Then attach
using a soldering iron to the hood blue and red LEDs. Pass the wire through the
hole on the plastic sleeve. On the plastic cap on top put a plastic sleeve. By
withdrawing from the coupling wire, attach a small toggle switch. Check the
operation of the mechanism established by setting the switch to a different
position. Screw design instead of a shower or faucet. When the hot water is
turned on, it should be highlighted in red, and when the cold, it is blue.
To make a 5-bottoms syringe container for
batteries, need copper foil, wire, glue gun with, the battery itself and the
syringe. To begin, cut with a knife tip of the syringe and pull the wires
through the body of the syringe. At the bottom of the copper foil preform
place. Cover the glue nozzle of the syringe to the wire, and the second route
the transactions through the piston, connecting it with the copper contacts.
Place the syringe button-type battery and a container ready.
Why Do I Need a Mirror Ball in a Disco?
A brilliant ball, let thousands of light
reflections can be seen in most of the discos. It was invented in the seventies
of the twentieth century fans of musical direction called "Glam
rock".
All "space" was included in the
same time fashionable. Glam rock headed this fashion wave, and their costumes
are often adorned with hundreds of tiny glitter foil. During concerts
spotlights such clothing reflects thousands of sparks, creating a stunning
effect. Clubs, which similar concerts were also decorated in the style
corresponding to a variety of toys mirror. The darkness of the hall, and
unexpected flashes evoked in viewers the feeling that they are in space.
Over time, small mirror toys are transformed
into a mirror disco LED
crystal magic ball light. They hung in the center of the room,
directing the ball to the light gun with small coefficients ray scattering.
Light at these cannons focused using lenses. Sam spun the ball with a small electric
motor, knocking on the walls of bright light glare. Taking into account the
total space subjects, this effect caused association with the rotation of the
galaxy.
In the Soviet Union, many high school
students did such balls and globes kaleidoscopes details. Now disco can buy
anywhere for a little money, of course, if there is a desire to re-create a
unique light atmosphere of the seventies at home or in the club. No payload disco
not carry, they are inefficient as the primary light source. It's just a way to
diversify the surrounding area and raise his mood and guests.
LED Spotlights Outdoor and Indoors
Today, LED spotlights are the ideal
lighting solution for modern cities, streets, buildings, bridges, billboards,
parking lots of storage space and adjacent areas. These light sources were
an indispensable tool to create a unique image of the city, accents, show and
highlight the beauty of the historic buildings, as well as the scale of
buildings. LED spotlights are the modern replacement of legacy projectors
with halogen and metal halide lamps. LED floodlights provide bright and
directional light, with maximum energy saving, long service life, high degree
of protection against mechanical damage and environmental influences and does
not require additional maintenance costs.
Consider the unit LED spotlights on
the example of a model from one of the well-known manufacturers of 50 watts. Modern
LED spotlights (e.g. 20W
LED Chip Lamp) from top manufacturers available in modern and
functional packaging with bright memorable design, which distinguishes them
from noname products. Spotlight housing and is usually made of a cast
aluminum alloy having a high thermal conductivity, which allows heat removal
from the LED module. The reflector is typically made of metal. With
coated aluminum deposition in a vacuum creates an even light output with given
scattering angle, providing high consumer properties of the spotlight. Silicone
seals and grooves on the spotlight housing provide high protection of
electronic components against moisture spotlight.
These models are designed for outdoor
use. Cheap as spotlights unknown manufacturers have moisture protection at
this level. Moreover, the poor quality of the assembly can be clearly seen
with the naked eye. Housing of high-quality LED spotlights usually has a
special anti-corrosion powder coating that provides protection against
mechanical damage and environmental impact (e.g. water does not linger on the
body as opposed to the usual smooth coat). The modern LED spotlights used inside
the housing are located LED module made on the chip on board technology (COB). The
diffuser is made of clear tempered glass.
How to Connect the LED Strips
Backlight LEDs actively spreading in modern
design. LED strips are used in various fields. For example, LEDs are used in
the interior spaces of buildings. The shop windows are also illuminated lights
from LEDs in cars are also used LED strip. Low cost, practicality and easy
installation LEDs have provided widespread.
You will need
- IP65
LED Strip Light
- Power Supply
- Scissors
- Soldering iron
In the beginning, you need to decide on the
venue installation LED strip and calculate the length of its future. One must
remember that the LED strip can be cut through multiple intervals (for example,
SMD 3528 Q60 tape can be cut every 5 cm), so you need to take this into account
in the calculation.
The next step is the selection of the power
supply. The power supply must strictly conform to the stated capacity of the
tape. In the selection of the block is best to consult with a professional
advisor, not to be mistaken.
After all, the components purchased to
prepare the surface for the tape mounting. Mounting location carefully
degreased. It is better if the surface is solid (in order to avoid damage to
the tape PCB). If the tape be mounted on metal or other conductive surfaces,
the tape must be isolated. If the tape does not need to cut, it is immediately
ready for installation. LED strips have a back side of the adhesive layer. With
this adhesive layer and made assembling strip. The protective coating is
removed and the tape pressed against the surface. BTW, you can select the LED
strips at Banggood. Besides, you can easily get other LED light (e.g. COB
LED chip) there with high quality and reasonable prices.
The final step is to connect the tape to the power supply and controller, which is produced by wires from the tape. Each wire has its own designation on the conductive path, R, G, B, and V +, and connected respectively polarity to 4 inputs on the controller R, G, B, V + .Blok power to 220V connect the two wires to terminals L + and N-. Next, connect the "+" on the power supply to the "+" on the controller, and "-" to "-", respectively. Voltage polarity must not be confused - this can lead to equipment failure and damage to the tape.
How to Connect the LED Strip to Each Other
LED strips are used in various fields. They
can be seen in the organization of the world in homes, on trees, windows,
mirrors, shelves of cabinets - transfer applications of LED, we can endlessly.
But selling such tapes only runs in the length of 5 meters. And so often LED
lamps must be connected with each other. Can you do it yourself? Yes, with
simply and quickly. There are two variants of the compounds.
If you want to connect the pieces of his
hands effortlessly, using special RGB
wire connector. They are suitable for work both with RGB, and with
one-color lights. Do not be afraid to damage the LED in its structure there are
no fragile parts and elements as in a conventional lamp designs. Yet exercise
reasonable caution.
To connect LED Strip yourself with the
connectors, follow these steps:
• Cut the length you need.
Take a look at the tape, and you'll find the right place of the cut. Typically,
the manufacturer indicates their every 3 LEDs;
• In the presence of
silicone at the ends of lines, carefully remove the structure. If you are
afraid to cause damage to the tape contacts, follow the cut perpendicular to
the desired location and exfoliated with silicone end;
• Taking into account the
polarity of the segments put into the connector and connect them to each other.
How Do I Install the LED Strip for Headlights?
Once entered into force a law on mandatory
inclusion of illumination lights in any weather, many car owners have begun to
look for ways to at all costs not to include them. Because we all know, in this
case, all lights will break down faster. Most nimble found out - LED strip for
headlights with their own hands, the issue we have decided to devote special
attention and tell the features of this connection, and why such a light is
allowed at the legislative level.
Many believe that this extra light and
creates only "Pont" We fundamentally disagree with this opinion.
After all, we consider that the installation of LED
crafts - it is a useful factor that makes the car better and allows you
to not include running lights of the city.
Modern brands set a default backlight,
however, it is found only in expensive models. Everyone will be able to set it
up it on your car, too much difficulty it is not enough to follow certain rules
in order not to have problems with the traffic police authorities.
Any feature battery
powered LED strip lights for the car is that the conventional tape
shines at an angle of 120 degrees - such light unacceptable. It is necessary to
create a viewing angle of 30 degrees, and then it will perform the DRL
function, creating visibility to at least 300 meters. The optimal degree of
luminescence is created by reflectors and lenses. I would like to reassure the
right, if you can buy LED strip for cars, then these lenses and reflectors are
installed by default.
LED Lights on Batteries and Features of Their Work
Today, there is high demand for LED
lighting. Even more common, steel LED lights are with batteries. In that case,
if you cannot connect to the mains used LED lights with batteries. They have a
number of advantages and advantages. Such lamps have a stylish design and are
appropriate in the interior of the room forehead. In addition they can be used
as an emergency (auxiliary) or alternate illumination.
Such lamps are widely used due to its
versatility, in the sense that they can be installed anywhere. The only thing
that is worth paying attention to - charge the battery. Depending on the type
and the type it is easy, you can choose the model of the battery, the effect of
which would be enough for a few months. There is also an option - a small
battery. In this case, use the lamps for domestic purposes for the short-lived
operation.
Battery
powered colored LED light strips are convenient
and practical in the event of an emergency. If you cannot connect to the
network, the device data is exactly what you will save. Furniture fixtures - on
the basis of the name, understand that this is the kind of fixtures, which is
mounted in the furniture. Also, the principle of their action is based on
batteries. With their help is guaranteed sufficiently long work. If you decide
to transform your interior designer to make decisions without thinking where to
hide the wires from the wires and lamps - this option is ideal. You can even
install special sensors of movement and music, laser. Now often used as
decorative LED lighting lamps for furniture or buttress; to illuminate hard to
reach places in the apartment, as separate individual wall and floor lamps and
even as street lamps for the garden or a country house.
How to Choose a Power Supply for LED Strip
Many people know that connect LED strips
directly into the outlet should not be - it will burn immediately. To do this,
use a power supply for LED strip, and choose how to calculate the power and
ribbon, we'll tell you in this article.
In total there are basically two: the power
supply for LED 12W tape and 24 watts. We recommend using 12W, because they cost
much less at the same time carry out such functionality. Power 12W is considered
optimal, they can be easily found at any market. To install at home is better
not find the device. If you connect a large tape, then you will come in handy
at 24 watts, as a rule, to illuminate a large area of a stretch ceiling it will
fit just right. If you want to do without a block, then think about the LED
ribbon RGB on line 220. BTW, you can select the power supply for LED Strip at
Banggood. Besides, you can easily get other lighting and lighting accessories (e.g.
key
ring light) there with high quality and reasonable prices.
Let's try to make the calculation on the
basis of one meter LED strip SMD 5050. The table shows the value of 7.2 watts.
Next, we determine the length of our tape, take, for example, the tape 10 meters.
Perform simple multiplication: 10 meters multiply by 7 watts. It turns out 72
watts - a power which should have a block. They can be found in any store, they differ
only in the installation process. For example, one can only be installed in a
dry room, and the other can be installed even in the bathroom. They are
considered the most popular although many people do not even use them to full
functionality. Maximum power of this unit is 75 watts. This capacity is enough
for an average LED strip. This unit can be used for lighting LED ceiling ribbon.
How to Connect the Motion Sensor Lighting
Each person more than once noticed motion
sensors, which include light. Such an arrangement can be called great, it is
suitable for installation: at the entrance, on the street, near a private
house, on the fence, etc. In this article we will answer the burning question,
how to connect solar
powered motion lights to illuminate on our own hands, just want to
point out the complex in such a setting there is nothing one can do it.
Any motion sensor for switching of lighting
has a fairly simple principle of work. There are three species that respond to
a particular signal.
- Responsive to sound.
- Vibrational. In this case, it closes the
circuit when they see near objects.
- Infrared responsive to heat.
We now consider the more important
question, and figure out how to connect the motion detector. Now there are
several combinations, each of them has its own characteristics.
The first circuit connecting the motion
sensor is the simplest, but at the same time it cannot be considered optimal
for installation in home or apartment. The light will turn on only when the
sensor detects motion. The second scheme is considered to be optimal. It is
possible to switch the circuit breaker to normal. Everything can be turned on
or off manually if desired. The third circuit is necessary in the case where
the nominal transmitter power ranges from 500 to 1000 watts. According to this
scheme are connected solar powered motion lights, it is desirable to add to the
circuit magnetic contactor. Last connection diagram of the motion sensor is
used when you need to install it in large rooms or at their summer cottage. It
can also be applied to the winding corridor, the scheme is considered quite
complicated. It is usually used only by professionals. BTW, you can select the solar-powered
motion sensor security light at Banggood. Besides, you can easily get
other lighting and lighting accessories (e.g. warm white LED flood light) there
with high quality and reasonable prices.
How to Connect the LED Tape
Special difficulties in the process of
mounting any tape there arise problems when something goes wrong. Let us
consider some basic situations, why it is necessary to connect the tape.
Initially, it would be desirable to recall the LED strip at 220 volts. It is peculiar, if the burn is at least one LED, you need to replace a meter.
When installing any lighting in the house
you may find that tape is too small or has been cut too large plot, there is,
when it is simply damaged. Adding a new section completely solve this
situation. Learn how to install the LED strip on the ceiling. Such a method
could be called optimal, it requires no special skills. It is enough to buy a
special 2
pin connector. It can be found in any market, the special rules for
choosing not.
The process of connecting LED strip does
not take a lot of time, and you do not need any additional tools. The two have
enough tape, scissors, and a connector for the LED strip.
- First of all you need to determine how many
contacts have LED ribbon. As a rule, three of them, if the tape RGBW they can
be 4. Accordingly it is necessary to select the 5050
LED strip connector that has 4 sockets.
- Prepare tape for this we clean it from the
coating. Doing this is neat, contacts can damage easily.
- Take one strip and inserted into the socket
connector, then fasten them.
- We perform the same actions with a
different tape.
- Before you close the cover, make sure that
polarity. All names are on tape and connectors.
- Close the lid.
Here we are with you and answer the
question, how to connect LED strip without soldering process is quite simple.
But it requires care.
How to Choose a RGB Controller
RGB-controller - a device with a remote
control and connected to it LED modules or LED ribbon. What is RGB? With these
colors by mixing the controller receives all colors and shades. Thanks to this
device, you can one-touch to create the necessary atmosphere in the room.
For example, the RGB-Controller helps
create the following atmosphere: romantic - turning purple or pink, soothing -
including turquoise or green, for watching movies good fit blue. So you can set
a variety of scenarios and modes. RGB controller allows you to set the smooth
transition of colors, so you can evaluate the illuminated object in all shades.
Very often these devices in a smooth color changing mode is used as a
supplement light to slow music, and sharp color change mode is well suited for
parties, strobe effect is perfectly combined with club music. There is RGB-controller
with sound activation mode: they light up brighter and change its color to the
beat of the music.
ARILUX
AL-LC01 RGB Controller is used to connect
remote and the main unit IR sensors. The convenience of this system is that a
single remote can control multiple independent controllers that are in the same
room. Operating range of the remote control is 10 meters, which for one room is
enough.
RGB-controller for LED strips with a radio
transmitter. In this system, the signal is transmitted over the air, it allows
you to install the controllers in special niches or hide them behind the
drywall construction. Range of the remote control is 50 meters. The disadvantage
of this system is the impossibility of installation in range of several remote
controllers, because the signal will be delivered to all devices at once. And
if you live in an apartment building and a neighbor set is the same system,
then you will be very frustrating when lighting begins to "live his
life."
The dimmer is the device for a smooth
change in brightness of LED modules or LED strips. These devices come in two
types: built-in and remote controls. BTW, you can select the RGB Controller at
Banggood. Besides, you can easily get other LED lighting or lighting accessories
(e.g. USB
LED Worklight) there with high quality and reasonable prices.
For Any Space, You Can Buy a String Fixture
Organize home lighting can be a variety of
ways. It does not have to be a central ceiling fixture. The latest materials
and systems, functionality and ease of design - this and more open the door to
bold decisions.
One of the new ways of lighting is the
string light. This design consists of several low-voltage strings - strands
between which are the fixtures. The whole structure is completely sealed, so no
real danger. Buy light string is the one who wants to keep the space of the
room, but still get the functionality. Each spotlight can be moved along the
length of the line.
Number of sources located on the tube
string lights, depending on the room size. Often, the best option - 2-5
pieces. It is important to take into account the capacity of the transformer,
because a large number of lamps, he cannot handle. String lights are used for
lighting commercial facilities, offices, art galleries and art museums. They
are much easier to install than recessed, track or overhead lighting. They can
be used various lamps, and so the quality of the light output will be much
different.
For transmission of electric current used
for lighting, string cables are of different thickness. This depends on the
applied voltage. If it is low and not dangerous to humans, there is no
insulation on cables, and they look like strings. When the high voltage
isolation required, as a rule, you should tighten 2 strings parallel to each
other. The distance is between three to twenty centimeters. These strings are
zero and phase conductors. For stable operation of the lamp, string is necessary
transformer and dimmer. Cables stretched so as not to sag. Therefore you need
to mount the system on the bearing wall or ceiling. BTW, you can select the string
lights at Banggood. Besides, you can easily get other lights (e.g. 12V
motion sensor lights) there with high quality and reasonable prices.
Solar Powered LED Flood Lights
Street lighting and architectural lighting is
an integral part of modern cities. Naturally, for this purpose you need a lot
of lamps and spotlights. So, there are a plurality of wires, and additional
electricity. However, new cabling is often inconvenient and sometimes
impossible. To avoid these problems, it is possible, using a spotlight on the
solar battery.
These solar
powered LED flood lights are deprived of all the shortcomings of
classical stationary lighting. They are not only completely autonomous, but do
not require special maintenance. And since they do not need complex switching
and connection, they are very easy to install.
In addition to autonomous solar spotlights
have such advantages as:
• Weatherproof design,
these devices are fully protected from atmospheric and climatic factors, and
are not afraid of snow or rain;
• The presence of the
pressure hull, which protects the device from shocks and other mechanical
influences (this is very important, as the street spotlights are often subject
to vandalism actions);
• Use for lighting
inaccessible areas;
• Forming a powerful,
bright and uniform light flux without blinking;
• No need to get
permission to install (which is inevitable when dealing with a classic
lighting).
The scope of the use of spotlights Solar is
very extensive. They are used to illuminate the buildings and create a facade
lighting, street lighting, parking lots, industrial sites, etc.
In fact, all outdoor solar spotlights are
made on the same principle. PV modules generate the energy that is stored in
the accumulator and gradually consumed during the night. Moreover, since it
requires fairly powerful lighting, projectors are used in high-performance
light barrier working even in cloudy weather. Turn on the device is performed
automatically, with a decrease in natural light (for it is in a special light
sensor). Working solar spotlights at night (or for a given program, when used
in architectural lighting) is adjusted by the controller, which does not allow
a complete discharge of batteries at the same time. BTW, you can select the solar
powered LED flood lights and rechargeable
LED floodlight at Banggood for high quality and reasonable prices.